Happy New Year
020 8778 0422 Phone lines open:
Mon-Fri 10 - 6.30 : Sat 10-4

£1290.00

from £23.40 /month

Number in stock: 0

Powersoft M30D 3000W RMS AmplifierPowersoft M30D 3000W RMS Amplifier
In use worldwide by leading touring and event sound companies, Powersoft amplifiers are preferred among the top ranking system designers, sound engineers, and contractors for providing reliable premier-grade power and headroom in the smallest possible package size. Maximum efficiency warrants minimum current draw, heat dissipation and power consumption, resulting in ′green′ products, saving the user a substantial amount of money over time. 

Like all M Series models, the M30D is optimized for 4Ω, and with its output power ideal for small to medium sized sound systems where e.g. no more than two 8Ω loads are connected in parallel to an amplifier channel, Why overpay for amplifiers capable of driving 2Ω loads?

The M30D is also available with on-board DSP and Ethernet interface. While the high-performance DSP is hidden inside and safe against accidental or intentional tampering, monitoring of vital system and amplifier data can be done via Armonía Pro Audio Suite™ software, the same user interface on the same network as for all Powersoft amplifiers. Locally, the M30D HDSP+ETH lets the user access up to four pre-sets per pushbutton on the rear panel. 

 

FEATURES:

 
•Weight and space saving: highly efficient switch mode PSU and Class D design in only one rack space (1U) and appr. 7kg/15lbs
•Outstanding sonic quality per design, including patented output filters
•Power saving: reduced current draw resulting in lower power consumption and cost – Green Audio Power™!
•Highly integrated and communicative: internal state-of-the-art DSP and Ethernet interface

•Compact size and light weight - only 1U and 7.4 kg for easier racking and shipping
•Powersoft legendary universal switch mode power supply up to 290V tolerant , compact, high performance
•AC mains voltage switchable 115V/230V
•Detachable AC mains cord
•Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
•Fixed frequency switch mode output stage for highest grade audio accuracy
•Patented output filter with ripple cancellation network
•Recessed front panel level controls and LED indicators
•Temperature controlled continuous variable speed fan, front to rear airflow
•Neutrik® XLR balanced input and Speakon® output connectors
•Fully protected circuitry design including DC, infrasonic, high frequency, thermal overload and short circuit
•Clip and RMS limiters to protect loudspeakers from damage from clipped wave forms and steady non-audio signals

FULL TECHNICAL SPECIFICATIONS:

GENERAL     


Number of channels 2    
Output power 4 Ω 8 Ω 100V 70V 8 Ω bridged
EIAJ test standard, 1 kHz, 1% THD 2 x 1,500 W 2 x 900 W 2 x 1,500 W ** 2 x 1,200 W 1 x 3,000 W
Max. output voltage 135 V(peak)
Max. output current 65 A(peak)

AC MAINS POWER     


Power supply Universal, regulated switch mode
Operating voltage 100 V - 240 V (factory selection) ± 10%, 50 Hz - 60 Hz
Consumption / current draw  @ 230 V @ 115 V
    Idle 37 W 0.3 A 0.6 A
    1/8 of max. output power @ 4 Ω* 530 W 3.54 A 7 A
    1/4 of max. output power @ 4 Ω* 1,024 W 6.52 A 13.04 A

THERMAL     


Environmental operating temperature 0-45° C / 32-113° F
Thermal dissipation Fan, continuously variable speed, temperature controlled, front to rear airflow
    Idle 32 kcal/hr 126 BTU/hr 
    1/8 of max. output power @ 4 Ω* 133 kcal/hr 529 BTU/hr 
    1/4 of max. output power @ 4 Ω* 236 kcal/hr 935 BTU/hr 

AUDIO     


Gain 32dB, 30dB, 28dB, 26dB, 24dB, 22dB, 20dB, 18dB, 14dB, 4dB, -∞, user selectable
Input sensitivity @ 8 Ω 2.13 V / 8.8 dBu   
Max input level 6 V / 17.7 dBu   
Input impedance 10 kΩ   
Frequency response 10 Hz - 30 kHz (1 W @ 8 Ω, ± 3 dB)
THD+N / SMPTE IMD ≤ 0.07% @ 1/2 of full power
DIM100 IMD typ. <0.005% (<0.02% @ >0.1 W)
S/N ratio >111 dBA (20 Hz - 20 kHz, A weighted)
Crosstalk separation >70 dB @ 1 kHz
Slew rate 40 V/µs @ 8 Ω, input filter bypassed
Damping factor @ 8 Ω >5000 @ 100 Hz

FRONT PANEL


Indicators 3 LEDs per channel: 2 x green, 1 x red
3 status LEDs: 1 x green, 1x white, 1 x yellow
Controls 1 stepped level attenuator pot per channel
Mains switch
Maintenance Dust filters foam behind front panel

REAR PANEL


Audio signal input connectors 2 x balanced Neutrik® XLR female
Loudspeakers output connectors 2 x Neutrik® Speakon NL4MD
AC mains IEC C13 16A connector; AC mains cord with 3-pin plug 15A for US, IEC Schuko 16 A for every other nation
Controls 1 x link switch, linking analog inputs 1 & 2

CONSTRUCTION
Dimensions W 483 mm / 19", H 44.5 mm / 1U, D 358 mm / 14.1"
Weight 7.3 kg / 16 lbs.
Chassis 1 mm (0.04”) steel chassis and steel removable dust cover, 3 mm (0.12”) steel front panel, screw hole protection, steel side reinforcement & rear support

 

 

Buy Powersoft M30D 3000W RMS Amplifier near London SE23 1HH - get directions
Twitter
Stumbleupon
Reddit
Pintrest
Newsvine
Linkedin
Google+
Google
Facebook
Digg
Share Product
Share via E-Mail
Share on Facebook Share on Twitter
Manufacturer Info
Powersoft
Delivery Options
Show
Finance from 0%
Finance Available
Manufacturers